October's Projects
This picture is a picture of a piece of the rod cut off from the lathe. We had to be very careful with the rod because the side where the part was cut off was very hot due to friction. We also did cut the rod a small bit and that ended up making the rod smoother. The picture above is a picture of a woman who works at the acceptance department at Massachusetts Institute of Technology (MIT). She was in a video that says that they only have around 15 minutes to check each application so the best way to fit all important projects done in a blog where all the work is compressed and described This picture is rough draft of a service cart we had decided to make to make the tank mobile. However we ran into a few problems such as the height from the ground and the measurements. This led to me critically thinking about all the factors that could come into play when designing the service cart. My after picture is a picture of the same hold downs, howe...